Medical technology is characterized by the production of mainly complex devices in small or medium quantities. In addition, a variety of consumables is needed. Safety aspects, such as compliance with clinical hygiene, durability and traceability standards, have top priority. This means there are extensive requirements for self-adhesive solutions, such as detergent-resistance, wipe- and scratch-resistance.

We offer consulting and engineering services to increase efficiency, through the use of adhesive technology, and can design appropriate solutions using existing materials (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent, disinfectant resistant, thermo-sensitive, indicator tape and sterilization tape).

Typical SMS products for medical technology customers are:

• Displays and keypads
• Seals/ gaskets: seals for (embedded) displays, e.g. protection against liquids and dust
• Type plates: small production runs to replace riveted metal plates with special requirements (e.g. detergent resistant)
• Warning labels: permanently bonded signs fulfilling special standards and requirements concerning durability and hygiene
• Test labels: to document regular internal and external audits and inventory
• Identification, type and series numbers, e.g. with consecutive serial numbers and/ or bar codes or data matrix code, e.g. to be customized by the customer by thermal transfer printing
• Security labels: marking of original parts and spare parts
• Electronics: disruptive discharge protection, discharge of static electricity and heat, and shielding

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

The aerospace industry primarily requires lightweight materials, which are also durable and rigid. Aluminium is still the standard material in aircraft construction, but is increasingly being replaced by materials such as carbon fibre composites (e.g. CFRP). Self-adhesive solutions allow the high-strength bonding of different materials without weakening the material structures. The comprehensive regulations and extremely strict requirements for the parts create further demand for self-adhesive solutions, which are often required in small production runs.

We offer consulting and engineering services to increase efficiency, through the use of adhesive technology, and can design appropriate solutions using existing materials (UL, CSA, MIL, FDA listed, RoHS , REACH , ASR A 1.3 , BGV A8 , DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent, Teflon™, Kapton™).

Typical SMS products for the aerospace industry are:

• Nameplates: small series for the replacement of riveted metal plates by self-adhesive solutions with special requirements (e.g. cold or heat resistant)
• Displays and keypads
• Warning labels: permanently bonded signs that meet special standards and special requirements (e.g. weathering, fluorescent, cold- or heat-resistant, high abrasion resistance)
• Test labels: use in the context of the letter-checks or quality system
• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and/ or bar codes or data matrix code, e.g. to be customized by the customer by thermal transfer printingSecurity labels: marking of original parts and spare parts
• Electronics: disruptive discharge protection, discharge of static electricity and heat, shielding
• Seals/gaskets: seals for (embedded) displays, e.g. protection against liquids and dust

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

The automotive industry is characterized by its emphasis on process, short product life cycles and high quality demands. This industry is one of the forces behind the development of self-adhesive solutions: by employing self-adhesive solutions to optimize their production processes and to implement innovations, automotive manufacturers and suppliers can improve their competitive position. Self-adhesive solutions allow for the high-strength bonding of different materials without weakening the material structures. The self-adhesive solutions used have to meet industry-specific standards as well as extensive requirements. These include durability, heat resistance, oil resistance and residue-free removal.

We offer consulting and engineering services to increase efficiency through the use of self-adhesive solutions, and develop appropriate solutions (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent, surface protection and scratch protection).

Typical SMS products for the automotive industry are:

• Nameplates: replacement of riveted metal plates by adhesive solutions from films or metal
• Warning: installation of permanent, bonded signs
• Reflective films: glued, weather-proof warning labels on vehicles
• Test labels: used for quality inspection, quality assurance systems or inventory
• Masking, paint protection
• Damping of components: use of elastic buffers/Bumpon™ and elastomers for acoustic damping components
• Walkway safety: for accessible parts of vehicles such as roof structures or entrances
• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and / or bar codes or data matrix code, e.g. to be customized by the customer by thermal transfer printing
• Connection: permanent connection between components by double-sided tapes, die cut parts and adhesives, as well as residue-free detachable connections
• Transport container labels: solutions for removable labels in the logistics sector
• Security labels: labels for protection against warranty claims, labelling of original components and spare parts
• Electronics: disruptive discharge protection, discharge of static electricity and heat, shielding
• Seals/ gaskets: seals for (embedded) displays, e.g. protection against liquids and dust
• Displays and keypads

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

Plastics industry products cover a wide field, ranging from packaging, appliances and automotive use, to the leisure industry. Plastic materials are shaped using heat or glue. Because of the affinity of the materials used by the plastics industry, self-adhesive solutions usually provide comprehensive value, e.g. for fastening, sealing, joining, securing and connecting. There are many different types of bonding adhesive.

We offer consulting and engineering services to increase efficiency, through the use of adhesive technology, and can design appropriate solutions using existing materials (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent, and adhesive tape for PP and PE).

Typical SMS products for plastics are:

• Nameplates: adhesive solutions from films or metal
• Warnings: installation of permanent, bonded signs
• Test labels: use in the context of quality assurance systems, for inventory or technical surveillance
• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and/ or bar codes or data matrix code, e.g. to be customized by the customer using thermal transfer printing
• Connection: permanent connection between components using double-sided tape, die-cut parts and adhesives, as well as residue-free detachable connections if desired
• Transport container labels: removable label solutions for logistics systems
• Security labels: labels for protection against warranty claims, labelling of original components and spare parts

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

Measurement technology encompasses numerous, diverse devices and components that are used to determine physical quantities. Accuracy and compliance with the strictest quality standards are essential. Self-adhesive solutions can spur product innovations in measurement technology and improve existing products in terms of durability and cost (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent, test labels and calibration labels).

Typical SMS products for measurement technology are:

• Nameplates: adhesive solutions from films or metal
• Displays and keypads
• Warnings: installation of permanent, bonded signs
• Test labels: use in the context of quality assurance systems or for inventory control
• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and/or bar codes or data matrix code, e.g. to be customized by the customer by thermal transfer printing
• Connection: permanent connection between components by double-sided tapes, die-cut parts and adhesives, as well as residue-free detachable connections if desired
• Transport container labels: solutions for removable labels for logistics systems
• Security labels: labels for protection against warranty claims, labelling of original components and spare parts
• Inventory labels: permanent inventory markings

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

In machine building, self-adhesive solutions are becoming increasingly important. On the one hand, conventional connecting methods such as riveting, screwing, crimping, and welding, are being replaced by adhesive bonding for cost and weight reasons. On the other hand, self-adhesive solutions allow for high-strength bonding of different materials without weakening the material structure. Furthermore, self-adhesive solutions accelerate production processes and thus increase productivity. Customers often demand long-lasting solutions that have to withstand vibrations, high temperatures, mechanical loads, lubricants and cleaning agents. This results in a very wide range of applications with a variety of uses for adhesive technical solutions.

We offer consulting and engineering services to increase efficiency, through the use of adhesive technology, and can design appropriate solutions using existing materials (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent and fluorescent).

Typical SMS products for mechanical engineering are:

• Nameplates: adhesive solutions from films or metal
• Warning: installation of permanent, bonded signs
• Test labels: use in the context of quality assurance systems or for inventory control
• Damping of components: use of elastic buffers/ bumpons and elastomers for acoustic damping components
• Walkway safety: for accessible parts of vehicles such as roof structures or entrances
• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and/or bar codes or data matrix codes, e.g. that can be customized by the customer using thermal transfer printing
• Connection: permanent connection between components by double-sided tapes, die-cut parts and adhesives, as well as residue-free detachable connections if desired
• Transport container labels: solutions for removable labels for logistics systems
• Security labels: labels for protection against warranty claims, labelling of original components and spare parts

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

In electronics, self-adhesive solutions are used to simplify the manufacturing process, reducing the space requirement of components, for bonding and labeling. Regularly very small self-adhesive solutions have to fulfill special requirements including durability, conductivity or insulation, writing properties and explosion protection.

We will gladly provide you with our consulting and engineering services to increase efficiency by the use of adhesive solutions, and developing appropriate solutions available (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent, heat conductive, isolating EMV, EMI and RFI).

Typical SMS products for electronics are:

• Gasket and joints: frames for (embedded) displays, e.g. protection against fluids and dust
• Displays and keypads
• Explosion protection: production of special self-adhesive parts
• Disruptive discharge protection
• Labels for EMI protection
• Test labels: use in the context of quality assurance systems or for inventory control
• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and/or bar codes or data matrix codes, e.g. that can be customized by the customer using thermal transfer printing
• Connection: permanent connection between components by double-sided tapes, die-cut parts and adhesives, as well as residue-free detachable connections if desired
• Transport container labels: solutions for removable labels for logistics systems
• Security labels: labels for protection against warranty claims, labelling of original components and spare parts

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

Products made out of various metals and their alloys, such as sheet metal, stainless steel, aluminum or steel, are vital. Their outstanding properties, such as conductivity, heat resistance and stability, mean that they are used in almost all industries. Metal processing companies have strict requirements in terms of metal materials and metal joining technology. Metals cannot always be joined using classic joining methods, such as welding or bolts. Moreover, the use of self-adhesive solutions for joining metals can offer major advantages:

• No penetration into the metal: no violation of the material and thus a reduction in the risk of corrosion
• Additional benefits due to the sealing properties of the adhesive: protection against the ingress of liquids or dirt
• Uniform distribution of force by surface bonding instead point loads for traditional joining methods
• Not visible

We will gladly provide you with our consulting and engineering services to increase efficiency by the use of adhesive solutions, and developing appropriate solutions available (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent and eloxal signs).

Typical SMS products for metal processing are:

• Connection: permanent connection between components by double-sided tapes, die-cut parts and adhesives, as well as residue-free detachable connections if desired
• Bonding, e.g. for frame constructions or stiffeners out of sheet metal
• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers   and/ or bar codes or data matrix code, e.g. to be customized by the customer by thermal transfer printing
• Sealing of joints
• Self-adhesive die-cut parts for covering before painting or powder-coating jobs and residue-free removal
• Explosion protection: production of special self-adhesive parts
• Test labels: use in the context of quality assurance systems, for inventory or technical inspection
• Transport container labels: solutions for Removable Labels for logistics systems
• Security labels: labels for protection against warranty claims, labelling of original components and spare  parts

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

Store and exhibition booth construction makes high demands on the design, ranging from futuristic to classic stand designs and promotional solutions. Wood, metal, glass, plastics and textiles, in particular, are used for implementation. Simple cutting and shaping, the on-site adaptation and smooth surfaces are important requirements.

Some materials need to be permanent, and others, instantly removable. Special designs demand special forms, e.g. the use of design elements built using foils, bonding with mirror adhesive tapes and the use of foams. Other crucial factors for the use of self-adhesive solutions are time saving during installation and workability, weight and space savings.

We will gladly provide you with our consulting and engineering services to increase efficiency by the use of adhesive solutions, and developing appropriate solutions available (Scotchmount™, Klett, Dual Lock™, Bumpon™, carpet tape, flooring tape, stone tape, Duct Tape, tesa®, Corotex®, fabric tape, removable or transparent).

Typical SMS products for metal processing are:

• Marking, labelling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and/or bar codes or data matrix codes, e.g. that can be customized by the customer using thermal transfer printing
• Connection: permanent connection between components by double-sided tapes, die-cut parts and adhesives, as well as residue-free detachable connections, like Dual Lock™ und Velcro®
• Self-adhesive coated foams

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

Printing and paper industry products can be upgraded through self-adhesive solutions, e.g. the attachment of paper and other materials to paper as well as the sealing of carton boxes.

We will gladly provide you with our consulting and engineering services to increase efficiency by the use of adhesive solutions or to develop appropriate solutions (dispersible tapes and splicing tape).

Typical SMS products for the printing and paper industry are:

• Coating with self-adhesive stripes (e.g. for fixing accounting documents, guaranty proofs or specimens), specialized on small and medium quantities, Speedytac™
• Outfitting of mailings and folders with self-adhesive points
• Outfitting of printed materials with self-adhesive solutions
• Tapes, packaging tapes (customized if required) for the efficient and safe packaging of cartons

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

The furniture industry uses adhesive technology for bonding components, acoustic insulation, design, labeling and logistics. Self-adhesive solutions should be permanent, not interfere with or attack wooden materials, and be able to be processed quickly and easily. Usually, classical adhesives are used for gluing and to apply laminates. SMS offers special solutions for high-quality design and invisible solutions, which do not attack wooden materials.

We will gladly provide you with our consulting and engineering services to increase efficiency by the use of adhesive solutions or to develop appropriate solutions available (bumpons, bumpers, buffers and rebound stops).

Typical SMS products for the furniture industry are:

• Bumpons, bases and bedplates: in standard sizes, as well as customized forms and sizes for buffering moving parts and acoustic insulation
• Connection: permanent connection between components using double-sided tapes, die-cut parts and adhesives, as well as residue-free detachable connections, such as Dual Lock™ und Velcro®
• Marking and labeling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers and/or bar codes or data matrix codes, e.g. that can be customized by the customer using thermal transfer
• Transport container labels: removable label solutions for logistics systems

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact

Optical and precision mechanical products and components distinguish themselves by their precision and usually by their miniaturization. The production and assembly requires the use of various metallic and nonmetallic materials. Self-adhesive solutions are mainly used to protect high-quality products, labeling, and in product-specific special applications.

We will gladly provide you with our consulting and engineering services to increase efficiency by the use of adhesive solutions, and developing appropriate solutions available (UL, CSA, MIL, FDA listed, RoHS, REACH, ASR A 1.3, BGV A8, DIN EN ISO 7010, ANSI, reflective, phosphorescent, fluorescent, highly transparent, surface protection, Vikuiti™, Scotchlite™).

Typical SMS products for the optical and precision mechanics industry are:

• Transport protection and cover for optics
• Reflective foil for use with optoelectronic sensors
• Die-cut parts and self-adhesive frames for component insulation and bonding
• Die-cut parts with pulling lug/ pulling strap for bonding light elements
• Marking and labeling: pictograms, instructions, type and series numbers, e.g. with consecutive serial numbers   and/ or bar codes or data matrix code, e.g. to be customized by the customer by thermal transfer printing
• Connection: permanent connection between components by double-sided tapes, die-cut parts and adhesives, as well as residue-free detachable connections
• Transport container labels: removable label solutions for logistics systems
• Test labels: used for quality inspection, quality assurance systems or inventory
• Security labels: labels for protection against warranty claims, labeling of original components and spare parts

YOUR REQUEST:

Fon: +49 (0)8141-35356-0 kontakt@klebeteam.de Contact